null

Trailing Arm | URC Trailing Arms, Pair | Double Shock Mount | RuffStuff

SKU:
R1982
Shipping:
$55.32 (Fixed Shipping Cost)
  • Trailing Arm | URC Trailing Arms | by: RuffStuff (R1982 ) www.renooffroad.com
  • Trailing Arm | URC Trailing Arms | by: RuffStuff (R1982 ) www.renooffroad.com
  • Trailing Arm | URC Trailing Arms, Pair | Double Shock Mount | RuffStuff
  • Trailing Arm | URC Trailing Arms | by: RuffStuff (R1982 ) www.renooffroad.com
  • Trailing Arm | URC Trailing Arms | by: RuffStuff (R1982 ) www.renooffroad.com
  • Trailing Arm | URC Trailing Arms | by: RuffStuff (R1982 ) www.renooffroad.com
  • Trailing Arm | URC Trailing Arms, Pair | Double Shock Mount | RuffStuff
  • Trailing Arm | URC Trailing Arms | by: RuffStuff (R1982 ) www.renooffroad.com
$572.75

Description

ruff-stuff-logo-240px.jpg

Trailing Arm | URC Trailing Arms | Double Shock Mount Set-Up | by: RuffStuff

Ultimate Rock Crawling Trailing Arms / heavy duty trailing arms specifically designed for the rocks! They have been tested and tortured in Ultra4 racing's 4400 class so you know they can handle anything you throw at them! They've been designed the RuffStuff way of STRENGTH, QUALITY, VALUE!

Easy weld-it-yourself kit for the competent welder or completely welded and ready to install, they are narrow-profile, easily customized, and tough as nails. These come with a Lifetime Warranty when welded by RuffStuff Specialties, All competitive racing applications INCLUDED!! Our URC Trailing Arms measure 48" eye-to-eye, with a 2" x .25" wall DOM main tube, 1/4" thick 1-piece main plate bent 3 times for maximum strength, minimal welding and warpage, and easy assembly.

Shocks mount BELOW the line between the bushing and heim (Unlike some competitors!) which prevents the trailing arm from trying to rotate when the shocks push down on it because the shocks "hang" below the center line. This Extends bushing life because the bushings and shocks are pushing to keep the arm straight together rather than the shocks fighting the bushings and trying to rotate the arm. These arms could be customized to use heims and uniballs instead of bushings (even without wobble stops). Dual drain slots allow for easy cleaning and helps extend life of shock eyelet bearings.

Features

  • Will not cause bent shock shafts should a bushing wear out or fail.
  • Second hole can be used as a strong and simple limiting strap mount if bypasses aren't used.
  • 3" wide polyurethane bushings at the frame side and our famous 1-1/4" heim joints on the axle side.
  • 1/2" shock bolt holes set for 1.5" misalignment width.
  • Each arm weighs in at ~40lbs welded.

Notes:

  • Please allow 5-7 days lead time if you choose for us to weld them.
  • Due to tolerances in the tube and plate bending, slight grinding may be necessary for perfect fitment of components
  • Instructions available under Resources tab above.

Kit Includes:

  • (2) Pre-bent pieces of 2" x .25" Wall DOM
  • (2) 1/4" main plates
  • (2) 1/4" shock valleys
  • (4) 1/4" overlay plates
  • (2) Bushing sets with 9/16" bolt sleeves
  • (2) 1 1/4" tube adapters
  • (2) 1 1/4" Rod Ends
  • (2) 1 1/4" Jam Nuts
  • (4) Stainless Steel Misalignment Spacers

Options:

  • Welded: Yes or NO

  • Degree (For Welded Kits ONLY): 0*, 5*, 10*

  • Misalignment Hole Size: 9/16, 5/8, 3/4

LIFETIME WARRANTY! (when welded by RuffStuff Specialties) All competitive racing applications INCLUDED!!

Please allow 5-7 days for shipping if you choose for us to weld them.

View AllClose

Warranty Information

Manufacture Lifetime warranty on breakage if RuffStuff welded the trailing arms. They are that strong.

RENO OFF-ROAD RETURN POLICY

Customer satisfaction is our top priority. We accept returns on unused products, buyers have decided against after receiving, on a case by case basis.

Contact us if you ordered a product that you have since decided against, and we will do our very best to get it returned or exchanged.

Any unused merchandise in the original packaging may be returned within 10 days of the original purchase date, or received date depending on the shipping timeline. There are no returns on electrical items, special orders such as build to order products. Discontinued items will be evaluated to determine if the product can be returned. No returns will be accepted of damaged (by user) or used items.

Return request need to be submitted using the attached form, so we can issue an RMA. Please include original packaging and a copy of your invoice or receipt.

For more information or any other questions you may have, please call us at 1-75-553-8333 or email info@renooffroad.com during normal business hours 8:00am to 5:00pm PST Monday to Friday

View AllClose
t>