NYLON - FOUR LAYER SUSPENSION LIMITING STRAP WITH 4130 HEAT TREATED CHROMOLY ENDS
Save on the cost of shipping with Reno Off-Road's free shipping.
Limiting strap length is measured from center of bolt hole to center of bolt hole. The bolt holes are 9/16" in diameter. The strap's webbing material is rated between 14,000 to 15,000 pounds. The 4130 chromoly ends are rated to 15,000 pounds.
Limiting straps are ideal for any off road application since they are vital in preventing damage to your suspension and drive train components. Without limiting straps, your shocks act as stops at maximum droop which can cause damage from your vehicle's unsprung weight. Limiting straps also prevent damage to your CV's by limiting the amount of maximum angle on your axles. The limit straps we carry are four-ply so only 1" of stretch is allowed for every 12" of strap.
If you're going to use an adjustable clevis then you'll need to compensate for the extra length of the clevis. See clevis diagram. An adjustable clevis allows you to fine tune your suspension and it also allows you to shorten the distance as the strap stretches over time.
You want to make sure that you double shear the bottom of the limiting strap mount for extra strength. Ideally, you would use a grade 9 bolt such as f911. The tab on the limiting strap and the tab that you weld to the chassis should always be lined up in the direction the limiting strap is going to pull. You never want to mount the tab "flat" to a surface because it will bend and eventually fail.
Customer satisfaction is our top priority. We accept returns on unused products, buyers have decided against after receiving, on a case by case basis.
Contact us if you ordered a product that you have since decided against, and we will do our very best to get it returned or exchanged.
Any unused merchandise in the original packaging may be returned within 10 days of the original purchase date, or received date depending on the shipping timeline. There are no returns on electrical items, special orders such as build to order products. Discontinued items will be evaluated to determine if the product can be returned. No returns will be accepted of damaged (by user) or used items.
Return request need to be submitted using the attached form, so we can issue an RMA. Please include original packaging and a copy of your invoice or receipt.
For more information or any other questions you may have, please call us at 1-75-553-8333 or email email@example.com during normal business hours 8:00am to 5:00pm PST Monday to Friday